Visiontek Systems offers a range of Indium tin oxide (ITO) coatings which are produced by low temperature vacuum deposition. ITO conductive coating is a conductive transparent coating and is available deposited on to plastic or glass substrates including polycarbonate, acrylic and polyester. A flexible system for handling the substrate enables both flat and shaped, as well as a range of injected moulded parts, to be coated.

 

 Types of glass which can be ITO coated are:

 Soda lime float glass (polished and un-polished)

 Borosilicate

 Fused Silica

 BK7

 ITO coatings are available with a sheet resistance from 2.5 - 1500ohms/square in sheet sizes up to 1000mmx1000mm. Visiontek Systems Ltd can supply fully machined glass and plastic parts and also provides an ITO coating service for free issue parts.

 The ITO coating can also be etched into patterns to produce fine conductor paths.

 Other conductive products which may be of interest

Standard ITO coated Glass

ITO coated Polished Glass

ITO coated Borosilicate Glass

FTO coated Glass

ITO coated Microscope Slides and Coverslips

ITO coated PET Film