Non-glare Etched Glass
- Glass with an acid-etched surface finish provides a high performance dispersive non-glare front surface
- This is a cost-effective solution where signal image quality is not critical. The further the non-glare surface is from the display, the greater the image haze
- Using a non-glare etch on the front screen of a CRT display can cause an interference with the light etching on the tubes. This will result in a coloured sparkling effect. To overcome this distortion the screen should be positioned at least 10 cm from the display.
|Windows up to||1600 x 920mm|
|Standard Thickness (mm)||1.1, 1.6, 2.0, 3.0, 4.0, 5.0
Other thickness supplied by optical lamination